Ma sélection
0 article

TGS-L5016T

OS3 - 16 10/100/1000 TX, administrable de niveau 3 Lite, PXE, redondance en anneau ITU G.8032


  • Certifications EN50155, EN61373, EN45545-2
  • 16 ports Ethernet Gigabit
  • Alimentation à entrées redondantes et isolées, gamme comprise entre 16.8 Vdc et 137.5 Vdc
  • Fonction PXE pour un démarrage depuis le réseau
  • Support de la norme ITU G.8032, cicatrisation < 20 ms
  • Indice de protection IP54
  • Support des fonctions ACL L2/L3, IGMP v3/router de port, MVR, QinQ, SSH/SSL
  • Fonction de surveillance des conditions de fonctionnement: température, tension, courant
  • double micro-code interne


  •                      

     
         
    • 16 ports 10/100/1000TX, fonctions d'administration de niveau 3 Lite
    • conforme aux spécifications de la norme EN50155 (équipements électroniques des matériels roulants)
    • conforme aux spécifications des norme EN4545-2(feu et fumée) et EN61373 (applications ferroviaires, matériels roulants)
    • trame jumbo 10 Ko sur l'ensemble des ports
    • protocole standard de gestion d'anneau ITU G.8032, temps de cicatrisation inférieur à 20 ms pour une topologie réseau à 256 switches
    • fonction PXE permettant un démarrage à partir du réseau
    • port USB pour la sauvegarde/restauration d ela configuration, mise à jour du micro-code
    • en option niveau d'administration de niveau 3 Lite ou norme de configuration train IEEE61375-2-5
    • entrées alimentation protégées contre les transitoires jusuq'à ±2000 Vdc
    • ports Ethernet protégés contre les décharges électrostatiques jusqu'à ±6000 Vdc
    • classe de service (CoS) 802.1p, 8 files d'attente par port
    • IEEE 802.1d STP, IEEE 802.1w RSTP, 802.1s MSTP redondance VLAN
    • Port-Based VLAN, IEEE 802.1Q Tag VLAN, QinQ
    • contrôle de la bande passante
    • supporte 802.1ab LLDP, Cisco CDP
    • DHCP Serveur/Client/Relais option 82/Serveur option 82/DHCP option 66
    • journal d'événements système, e-mail d'alertes via serveur SMTP, trap SNMP en cas de défauts, RMON (Remote Monitoring)
    • une sortie relais pour le report d'événements
    • fonctions de sécurité:
      • sécurité au niveau du port: entrée /fltrage adresse MAC
      • sécurité au niveau de l'IP
      • sécurité au niveau de l'authentification: IEEE802.1X/RADIUS
      • SSH / SSL/ACL L2 et L3
    • IGMP v3 et Query  pour les applications multimédia
    • watchdog intégré
    • fonction de surveillance et d'alertes (Trap SNMP) de l'environnement de fonctionnment du switch (température, niveau de tension, charge en courant)
    • large plage d'alimentation comprise entre 16.8V et 137.5V
     

    Spécifications logicielles TGS-L5016T

    Spécifications matérielles TGS-L5016T

    Standards

    IEEE802.3 10Base-T Ethernet
    IEEE802.3u 100Base-TX
    IEEE802.3ab 1000Base-T
    IEEE802.3z Gigabit fiber
    IEEE802.3x Flow Control and Back Pressure
    IEEE802.3ad Port trunk with LACP
    IEEE802.1d Spanning Tree
    IEEE802.1w Rapid Spanning Tree
    IEEE802.1s Multiple Spanning Tree
    IEEE802.3ad Link Aggregation Control Protocol (LACP)
    IEEE802.1AB Link Layer Discovery Protocol (LLDP) 
    IEEE802.1X User Authentication (Radius)
    IEEE802.1p Class of Service
    IEEE802.1Q VLAN Tag

    Switch Architecture

    Back-plane (Switching Fabric): 32Gbps

    Mac Address

    16K MAC address table

    Jumbo frame

    10KB

    Connectors

    10/100/1000T: 16 x M12 8-pole X-coded with Auto MDI/MDI function
    Power Input connector: 1 x M12 4-pole A-coded
    Reset/Console/USB : 1 x M12 8-pole A-coded
    DIDO: 1 x M12 5-pole A-coded

    Network Cable

    10Base-T: 2-pair STP Cat. 3, 4, 5/ 5E/ 6 cable
    EIA/TIA-568 100-ohm (100m)
    100Base-TX: 2-pair STP Cat. 5/ 5E/ 6 cable; EIA/TIA-568 100-ohm (100m)
    1000Base-T: 4-pair STP Cat5E/6 cable

    LED

    Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); RM(Green)
    10/100/1000T Ethernet port: Link/Activity (Green)

    DI/DO

    2 Digital Input (DI) : 
    Level 0: -30~2V / Level 1: 10~30V
    Max. input current:8mA 
    2 Digital Output(DO): Open collector to 40 VDC, 200mA

    Operating Humidity

    5% ~ 95% (Non-condensing)

    Operating Temperature

    -40°C~75°C / -40°F~167°F

    Storage Temperature

    -40°C~85°C / -40°F~165°F

    Power Supply

    Dual DC isolated input, 16.8VDC~137.5VDC

    Power Consumption

    24.8W

    Case Dimension

    IP54 model: Aluminum case
    304mm(W)x195mm(H)x89.5mm(D)

    Weight

    1.8kgs

    Installation

    Wall Mount Design

    EMI & EMS

    FCC Part 15 Class A, 
    IEC/EN61000-6-2
    CE EN55032 Class A 
    CE EN55024
    CE EN61000-4-2 (ESD) Level 3 
    CE EN61000-4-3 (RS) Level 3 
    CE EN61000-4-4 (EFT) Level 3 
    CE EN61000-4-5 ED3 (Surge) Level 3 
    CE EN61000-4-6 (CS) Level 3 
    CE EN61000-4-8 (Magnetic field) Level 3

    Verifications

    EN50155/EN50121-3-2/EN50121-4/IEC61373; 
    EN55032; EN45545-2 R13/R22/R23/R24/R25 
    (EN ISO 4589-2, EN ISO 5659-2, NF X70-100-1 & 2) Fire & Smoke verification

    Stability Testing

    EN61373 (Shock and Vibration)

    Spécifications logicielles TGS-L5016T

    Management

    SNMP v1 v2c, v3/ Web/Telnet/CLI

    SNMP MIB

    RFC 1213 MIBII
    RFC 1158 MIB
    RFC 1157 SNMP MIB,
    RFC 1493 Bridge MIB*
    RFC 1573 IF MIB  
    RFC 2674 Q-Bridge MIB* 
    RFC 2819 RMON MIB
    Private MIB

    ITU G.8032

    Support ITU G.8032 for Ring protection in less than 20ms for self-heal recovery (single ring)
    Support various ring/chain topologies
    Includes basic single ring, enhanced ring
    Cover multicast & data packets protection

    User friendly UI

    1. Auto topology drawing
    2. Topology demo
    3. Complete CLI for professional setting

    Port Trunk with LACP

    LACP Port Trunk: 8 Trunk groups

    LLDP

    Supports LLDP to allow switch to advise its identification and capability on the LAN

    CDP

    Cisco Discovery Protocol for topology mapping

    Environmental Monitoring

    System status for actual input voltage, ambient temperature and total power load to be shown in GUI and send alerting if any abnormal status

    VLAN

    Port Based VLAN 
    IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096) 
    GVRP 
    Protocol based VLAN
    Subnet based VLAN

    IPv6/4

    Present

    Spanning Tree

    Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree 8 MSTI

    Quality of Service

    The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP

    Class of Service

    Support IEEE802.1p class of service, per port provides 8 priority queues

    Remote Admin

    Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.

    Login Security

    Supports IEEE802.1X Authentication/RADIUS

    Port Mirror

    Support 3 mirroring types: “RX, TX and Both packet”

    Network Security

    Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.
    802.1X access control for port based and MAC based authentication/static MAC-Port binding
    Ingress/Egress* ACL L2/L3
    SSL/ SSH for Management
    HTTPS for secure access to the web interface
    TACACS+ for Authentication

    IGMP

    Support IGMP snooping v1,v2,v3; Supports IGMP static forwarding; 1024 multicast groups; IGMP router port ; IGMP query; GMRP

    MLD Snooping

    Support IPv6 Multicast stream

    Static multicast forwarding

    Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application

    Bandwidth Control

    Support ingress packet filter and egress* packet limit.
    The egress* rate control supports all of packet type.
    Ingress filter packet type combination rules are Broadcast/Multicast/Flooded Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all types of packet.
    The packet filter rate can be set an accurate value through the pull-down menu for the ingress packet filter and the egress* packet limit.

    Flow Control

    Supports Flow Control for Full-duplex and Back Pressure for Half-duplex

    System Log

    Supports System log record and remote system log server

    Protection

    1. Miss-wiring avoidance
    2. Node failure protection
    3. Loop protection

    SNMP Trap

    Up to 5 trap stations; trap types including:

    1. Device cold start
    2. Authorization failure
    3. Port link up/link down
    4. DI/DO open/close
    5. Typology change(ITU ring)
    6. Power failure
    7. Environmental abnormal

    PXE

    PXE to verify switch firmware with the latest or certain version

    DHCP

    Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based DHCP; DHCP Option 66 ; IPv6 address resolution for basic DHCP server

    Mac based DHCP Server

    Assign IP address by Mac that can include dumb switch in DHCP network

    DNS

    Provide DNS client feature and can set Primary and Secondary DNS server.

    SNTP

    Supports SNTP to synchronize system clock in Internet

    Firmware Update

    Supports TFTP firmware update, TFTP backup and restore; HTTP firmware upgrade

    Configuration 
    upload and download

    Supports editable configuration file for system quick installation; Support factory reset pin to restore all settings back to factory default

    ECN*

    Complies with IEC 61375-3-4 (ECN*) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (TBN).

    L3Lite/TBN

    Lantech OS3 and OS4 are optional upgradable to L3 Lite or TBN communication protocols for future expansion. The optional L3Lite includes VRRP, Router-on-a-stick, Inter- VLAN routing. Optional TBN complies with IEC61375-2-5 TBN for Train Backbone Network.
    Detail SPEC upon request.

     
    P/N Modèle Description
    8361-4311 TGS-L5016T-54-WVI 16 10/100/1000T M12 X-coded EN50155
    OS3 Managed Ethernet Switch
    16.8V~137.5VDC dual isolated input
     IP54 housing; -40°C to 75°C

    Options logicielles

     

    P/N Modèle Description
    9000-114 OS3 – L3L OS3 software platform with Layer 3 Lite functions
    (please check Lantech software data sheet for details)
    9000-115 OS3 – IEC61375-2-5 OS3 software platform with IEC-61375-2-5 ETBN
    (Ethernet Train Backbone Networks) function
    (please check Lantech software data sheet for details)
    9000-116 OS3 – L3 OS3 software platform with Layer 3 functions
    (please check Lantech software data sheet for details)

     

     
         
    Description Chargement
    Fiche technique TGS-L5016T
     
    Accueil | Contact | Applications |