TPGS-L5016T

Standards

IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree
IEEE802.3ad Link Aggregation Control Protocol (LACP)
IEEE802.1AB Link Layer Discovery Protocol (LLDP) 
IEEE802.1X User Authentication (Radius)
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE802.3at/af Power over Ethernet

Switch Architecture

Back-plane (Switching Fabric): 32Gbps

Mac Address

16K MAC address table

Jumbo frame

10KB

Connectors

10/100/1000T: 16 x M12 8-pole X-coded with Auto MDI/MDI function
Power Input connector: 1 x M12 4-pole A-coded
Reset/Console/USB : 1 x M12 8-pole A-coded
DIDO: 1 x M12 5-pole A-coded

Network Cable

10Base-T: 2-pair STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair STP Cat. 5/ 5E/ 6 cable; EIA/TIA-568 100-ohm (100m)
1000Base-T: 4-pair STP Cat5E/6 cable

LED

Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); RM(Green)
10/100/1000T Ethernet port: Link/Activity (Green)
PoE : Link/Act (Green)

DI/DO

2 Digital Input (DI) : 
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA 
2 Digital Output(DO): Open collector to 40 VDC, 200mA

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-40°C~75°C / -40°F~167°F

Storage Temperature

-40°C~85°C / -40°F~165°F

Power Supply

Dual DC isolated input, 16.8VDC~137.5VDC

PoE Budget

80W

PoE pin assignment

M12 port # 1~ # 8/16 support IEEE 802.3at/af End-point. Per port provides up to 30W

Power Consumption

Max. 33.8W (exclude PoE load)

Case Dimension

IP54 model: Aluminum case
304mm(W)x195mm(H)x89.5mm(D)

Weight

1.8kgs

Installation

Wall Mount Design

EMI & EMS

FCC Part 15 Class A, 
IEC/EN61000-6-2
CE EN55032 Class A 
CE EN55024: CE EN61000-4-2 (ESD) Level 3 
CE EN61000-4-3 (RS) Level 3 
CE EN61000-4-4 (EFT) Level 3 
CE EN61000-4-5 ED3 (Surge) Level 3 
CE EN61000-4-6 (CS) Level 3 
CE N61000-4-8 (Magnetic field) Level 3

Verifications

EN50155/EN50121-3-2/EN50121-4 verification
EN45545-2 R13/R22/R23/R24/R25 (EN ISO 4589-2, EN ISO 5659-2, NF X70-100-1 & 2) Fire & Smoke verification

Stability Testing

EN61373 (Shock and Vibration)

Management

SNMP v1 v2c, v3/ Web/Telnet/CLI

SNMP MIB

RFC 1213 MIBII
RFC 1158 MIB
RFC 1157 SNMP MIB
RFC 1493 Bridge MIB*
RFC 1573 IF MIB
RFC 2674 Q-Bridge MIB*
RFC 2819 RMON MIB
Private MIB

ITU G.8032

Support ITU G.8032 for Ring protection in less than 20ms for self-heal recovery (single ring)
Support various ring/chain topologies
Includes basic single ring, enhanced ring
Cover multicast & data packets protection

PoE Management

PoE Detection to check if PD hangs then restart the PD
PoE scheduling

Per Port PoE Status

On/ Off, voltage, current, watts, temperature

User friendly UI

1. Auto topology drawing
2. Topology demo
3. Complete CLI for professional setting

Port Trunk with LACP

LACP Port Trunk: 8 Trunk groups

LLDP

Supports LLDP to allow switch to advise its identification and capability on the LAN

CDP

Cisco Discovery Protocol for topology mapping

Environmental Monitoring

System status for actual input voltage, current , total power load and ambient temperature to be shown in GUI and send alerting if any abnormal status

VLAN

Port Based VLAN 
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096) 
GVRP 
Protocol based VLAN
Subnet based VLAN

IPv6/4

Present

Spanning Tree

Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree 8 MSTI

Quality of Service

The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points – DSCP

Class of Service

Support IEEE802.1p class of service, per port provides 8 priority queues

Remote Admin

Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.

Login Security

Supports IEEE802.1X Authentication/RADIUS

Port Mirror

Support 3 mirroring types: “RX, TX and Both packet”

Network Security

Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.
802.1X access control for port based and MAC based authentication/static MAC-Port binding
Ingress/Egress* ACL L2/L3
SSL/ SSH for Management
HTTPS for secure access to the web interface
TACACS+ for Authentication

MLD Snooping

Support IPv6 Multicast stream

IGMP

Support IGMP snooping v1,v2,v3; Supports IGMP static forwarding; 1024 multicast groups; IGMP router port ; IGMP query; GMRP

Static multicast forwarding

Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application

Bandwidth Control

Support ingress packet filter and egress* packet limit.
The egress* rate control supports all of packet type.
Ingress filter packet type combination rules are Broadcast/Multicast/Flooded Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all types of packet.
The packet filter rate can be set an accurate value through the pull-down menu for the ingress packet filter and the egress* packet limit.

Flow Control

Supports Flow Control for Full-duplex and Back Pressure for Half-duplex

System Log

Supports System log record and remote system log server

Protection

1. Miss-wiring avoidance
2. Node failure protection
3. Loop protection

SNMP Trap

Up to 5 trap stations; trap types including:

1. Device cold start
2. Authorization failure
3. Port link up/link down
4. DI/DO open/close
5. Typology change(ITU ring)
6. Power failure
7. Environmental abnormal

PXE

PXE to verify switch firmware with the latest or certain version

DHCP

Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based DHCP; DHCP Option 66; IPv6 address resolution for basic DHCP server

Mac based DHCP Server

Assign IP address by Mac that can include dumb switch in DHCP network

DNS

Provide DNS client feature and can set Primary and Secondary DNS server.

NTP/SNTP

Supports NTP/SNTP to synchronize system clock in Internet

Firmware Update

Supports TFTP firmware update, TFTP backup and restore; HTTP firmware upgrade;

Configuration 
upload and download

Supports editable configuration file for system quick installation; Support factory reset pin to restore all settings back to factory default

ECN*

Complies with IEC 61375-3-4 (ECN*) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (TBN).

L3Lite/TBN

Lantech OS3 and OS4 are optional upgradable to L3 Lite or TBN communication protocols for future expansion. The optional L3Lite includes VRRP, Router-on-a-stick, Inter- VLAN routing. Optional TBN complies with IEC61375-2-5 TBN for Train Backbone Network.
Detail SPEC upon request.